Steel is an alloy of iron and carbon among other elements and possesses extremely high tensile strength. Due to this unique property along with relatively low cost, steel is used in a variety of industries such as stone crusher industry, automobiles, Infrastructure and automobile. Our company is well equipped to manufacture different grades of steel casting depending on customer requirements
Specification | Chemical Composition % | ||||||||
C | Mn | S | P | Si | Cr | Ni | Mo | Cu / V | |
IS 1030 I | 0.25 0.35 |
0.60 0.80 |
0.05 MAX |
0.05 MAX |
0.60 MAX |
||||
IS 1030 II | 0.20 0.25 |
0.70 1.20 |
0.05 | 0.05 | 0.60 | ||||
IS 1030 GR 27-54 |
0.27 0.35 |
1.00 1.20 |
0.05 | 0.05 | 0.60 | ||||
IS 1030 GR 23-45 |
0.23 0.26 |
0.80 1.10 |
0.05 | 0.05 | 0.40 0.60 |
||||
IS 1030 GR 26-52 |
0.28 0.32 |
0.90 1.10 |
0.04 | 0.04 | 0.60 | ||||
IS 1030 GR 30-57 |
0.35 0.40 |
0.80 1.00 |
0.05 | 0.05 | 0.60 | ||||
IS 1030 GR 34-57 |
0.35 0.40 |
0.80 MAX |
0.05 | 0.05 | 0.60 | ||||
IS 1030 GR 26-52 |
0.27 0.35 |
1.00 1.20 |
0.05 | 0.05 | 0.60 | ||||
IS 1030 GR 20-40 |
0.23 0.25 |
0.70 1.20 |
0.05 | 0.05 | 0.60 | ||||
IS 2707 GR I | 0.40 0.48 |
1.00 MAX |
0.05 | 0.05 | 0.60 | ||||
IS 2707 GR II | 0.39 0.45 |
1.00 1.40 |
0.05 | 0.05 | 0.30 0.60 |
||||
IS 2708 GR I | 0.18 0.25 |
1.20 1.60 |
0.05 | 0.05 | 0.60 | ||||
IS 2708 GR I | 0.25 0.33 |
0.25 0.33 |
1.20 1.60 |
0.05 | 0.60 | ||||
IS 2708 GR III | 0.20 0.38 |
1.20 | 0.05 | 0.05 | 0.60 | ||||
IS 2708 GR III (SP) | 0.25 0.33 |
1.20 1.60 |
0.05 | 0.05 | 0.60 | 0.30 | 0.40 | 0.20 | CU 0.3 V 0.25 |
Specifi-cation | Chemical Composition % | ||||||||
C | Mn | S | P | Si | Cr | Ni | Mo | Cu / V | |
EN 2 | 0.2 | 0.3 0.6 |
0.04 | 0.04 | 0.3 | ||||
EN 2B | 0.12 0.18 |
0.3 0.6 |
0.04 | 0.04 | 0.3 | ||||
EN 3 | 0.25 | 1.0 | 0.06 | 0.06 | 0.05 0.35 |
||||
EN 3A | 0.15 0.25 |
0.4 0.9 |
0.06 | 0.06 | 0.05 0.35 |
||||
EN 4 | 0.2 0.3 |
1.0 | 0.06 | 0.06 | 0.35 | ||||
EN 4 A | 0.3 | 1.0 | 0.06 | 0.06 | 0.05 0.35 |
||||
EN 5 | 0.25 0.35 |
0.6 1.0 |
0.06 | 0.06 | 0.05 0.35 |
||||
EN 6 | 0.4 | 0.5 0.9 |
0.06 | 0.06 | 0.05 0.35 |
||||
EN 7 | 0.1 0.3 |
0.7 1.3 |
0.06 | 0.18 | 0.35 | ||||
EN : 8 | 0.35 0.45 |
0.60 1.00 |
0.06 | 0.06 | 0.050 0.350 |
||||
EN 8 M | 0.35 0.45 |
0.9 1.1 |
0.07 | 0.2 | 0.25 | ||||
EN : 9 | 0.50 0.60 |
0.50 0.50 |
0.05 | 0.05 | 0.60 | ||||
EN 10 | 0.5 0.6 |
0.5 0.8 |
0.06 | 0.06 | 0.05 0.35 |
0.5 0.8 |
|||
EN 11 | 0.5 0.7 |
0.5 0.8 |
0.05 | 0.05 | 0.35 | 0.5 0.8 |
|||
EN 12 | 0.3 0.45 |
1.5 | 0.05 | 0.05 | 0.1 0.35 |
0.6 1.0 |
Specifi-cation | Chemical Composition % | ||||||||
C | Mn | S | P | Si | Cr | Ni | Mo | Cu / V | |
EN 19 | 0.35 0.45 |
0.5 0.8 |
0.1 0.35 |
0.9 1.5 |
0.2 0.4 |
||||
EN 19 A | 0.35 0.45 |
0.5 0.8 |
0.1 0.35 |
0.9 1.2 |
0.2 0.35 |
||||
EN 19 B | 0.35 0.40 |
0.5 0.8 |
0.1 0.35 |
0.9 1.2 |
0.2 0.35 |
||||
EN 19 C | 0.4 0.45 |
0.5 0.8 |
0.1 0.35 |
0.9 1.2 |
0.2 0.35 |
||||
EN 20 | 0.22 0.5 |
0.4 0.7 |
0.1 0.35 |
0.5 1.5 |
0.3 | 0.4 1.0 |
|||
EN 21 | 0.25 0.35 |
0.5 0.8 |
0.1 0.35 |
0.3 | 2.75 3.50 |
||||
EN 22 | 0.35 0.45 |
0.5 0.8 |
0.1 0.35 |
0.3 | 3.25 3.75 |
||||
EN 23 | 0.25 0.35 |
0.45 0.7 |
0.1 0.35 |
0.5 1.0 |
2.75 3.5 |
0.3 | |||
EN 24 | 0.35 0.45 |
0.45 0.70 |
0.05 | 0.05 | 0.10 | 0.90 | 1.38 1.80 |
0.20 0.30 |
|
EN 31 | 0.9 1.1 |
1.1 | 0.05 | 0.05 | 0.1 0.35 |
1.0 1.5 |
0.3 0.5 |